Mesh mask with activated carbon face masks BB 630, replaceable active layer die
Made with activated carbon pressed in nonwoven fabric (Activated Carbon Non-Woven) Most of the ingress into the respiratory tract of microscopic dust particles and other pollutants.
Filters out most odors, chemicals, gasoline and smoke odors.
Respiratory protection
· Is a material that both carries the characteristics of plastic (plastic), and has the characteristics of rubber (rubber).
Recyclable, non-toxic
· Good face plaque
Activated carbon mesh mask BB 630
– Activated carbon mesh mask BB 630 is used to cover dust and sun protection, it also helps you to prevent respiratory diseases. due to toxic and bacterial emissions.
– Active masks have small gaps that can filter out dust and harmful substances. Activated fibers adsorb gases, toxic fumes in the air. Also, hugging the nose and mouth should be safer.
– Mesh mask with activated carbon BB 630 creates extremely good effects in preventing dust, bacteria, waterproof, translation, safe for users, cool, comfortable, does not cause skin allergies, bars The nose restraint helps the mask in the correct position and creates a tight, EO-sterilized type.
How to use activated carbon face mask to bring high efficiency?
– First, to use clean active masks, should have 2 to 3 masks to change. Active masks should be washed as soon as they get out of a polluted environment with a lot of toxic smoke, …
– Second letter, use an appropriate active mask. It is an active mask that is just the size of your face. When wearing an active mask, you should squeeze the iron on the bridge of the nose to seal.
– Third, disinfect active masks. To do this, you can use one of two ways: One is to boil the active mask in 1% salt water and boil for about 15 minutes. Second, soak the mask in antibacterial soap for 15 minutes, then rub it thoroughly, then rinse it with clean water, and dry it in the sun.
– Fourth, do not use more than 30 times. To ensure the active mask is safe, after 30 times of washing, you should replace it completely and do not reuse.
Distinguish real and fake active carbon face masks fake?
The fake active masks are currently widely available in the market. Masks are objects that come in direct contact with the body so it is extremely important to use a quality active mask. If you buy a fake active mask, the serious health affects you will not have foreseen.
How to distinguish real – fake active masks is not difficult either. When buying an active mask, users only need to note the following points:
• In terms of fabric: a real active mask will be made of a very soft fabric, while the fabric of the imitation will be very rough. When wearing on a real mask, users will feel comfortable, not be uncomfortable friction in the face area. At the same time, the filter layer of the mask is also thicker, bringing higher efficiency to the user.
• About the activated carbon face mask inside: true or fake the most important is in this class, this is the biggest difference between an active mask and a regular mask. The simplest way to know that is to cut the outer layer of the mask out. Then, you take your hand and forcefully pull the middle layer of the mask. If it is a working mask, the middle layer will not be torn and chewy, and a fake, poor mask will definitely tear as soon as you pull it. It might just be a black cloth to cover the user’s eyes.
So, in short, to be able to buy a mask that works well, you should go to the agents and shops of reputable businesses. Do not buy at small establishments, of unknown origin. Be a smart consumer
